Connection

When installing a backsplash using connected tiles at what place on the base should you start installing?
Q. I am using connected tiles 2 inch by 2 inch of which there is 36 small tiles connected.
Asked by JEN A - Sat Dec 29 21:31:14 2007 - - 3 Answers - 0 Comments

A. Start at the bottom and work up to the cabinets to keep all the cuts as hidden as possible. You don't need to divide the walls evenly from side to side, unless you want to. I usually keep all my cuts in the corners and leave full tiles to the outside, or exposed edges. And remember to lightly tap the tiles once they are installed to ensure they are properly set in the glue. One thing you really have to watch with mosaic tiles is making sure that your joints line up. If you are not careful you'll see each individual sheet. It will only show up after it's grouted, and then its too late. So take your time.
Answered by mattdaddy - Sat Dec 29 23:03:52 2007

Can i connect a laptop to internet through an ethernet cable connected to PC?
Q. My Pc is connected to the internet through a speedtouch 330 modem. I then plug in an ethernet cable into my computer and use it to access xbox live. But when i plug this ethernet into my laptop i do not know how or if i can connect to the internet using this.
Asked by jamie_cotter - Sat Dec 13 14:35:07 2008 - - 2 Answers - 0 Comments

A. You want to buy a multi port Router 1 Port for the Desktop PC 1 Port for the Laptop 1 Port for the XBOX 360 5 open ports for future expansion Plug the Desktop PC, Laptop, XBOX 360 into the LAN ports. Each individual device will need an ethernet cable. You will plug the ethernet cable coming from the Modem into the WAN port of the Router.
Answered by Tony M - Sat Dec 13 14:41:45 2008

How do I access the computer that is connected to my wireless router through my laptop?
Q. I have a wireless router. The wireless router is connected to my DSL modem and my desktop home PC. My desktop is connected to the router physically with an ethernet cable and accesses the internet as such. I also have my laptop which I use to connect to the wireless router, wirelessly. My question is, how or can I access my desktop PC to go through files, etc, via my laptop?
Asked by mtdew120 - Sun Dec 9 16:18:57 2007 - - 2 Answers - 0 Comments

A. What you do is Share folders. Go to the PC and right click the folder you want to share (I Normally share Drive C: but if you don't have a sequrity key on the router its not recomened. right click on it the click "proerties" then the sharing tab on the display box. click the apporite bothen click ok. Now go to the laptop then find My Network Places its usually in the Start menu and could be on the desktop. there you will see a folder lke this "K: on \\PC" Where K is the folder and \\PC is the name of the pc.
Answered by Aaron B - Sun Dec 9 16:30:45 2007